EXsmart 2 Square MIFARE CSN Reader

TDSi Part No. 5002-0435 / 5002-0436
Dimensions 102 x 102 x 20 mm Connector including terminal block protrudes by 11 mm from the rear face.
Weight 270g
Operating Environment -20°C to +55°C, 0 to 95 %RH (non-condensing)
Power Supply 9 to 16 VDC, 100 mA max
Operating Frequency 13.56 MHz (nominal)
Card Technology ISO14443-A: MIFARE Standard (1k) MF1 ICS50, MIFARE (4k) MF1
ICS70
Sounder Integral with external control
LEDs 2 – red and green both with independent external control. Bi-colour input capability for connection to TDSi access control units.
Reader Range 50 mm (nominal) with ISO card
Output Formats Magstripe, 26-bit Wiegand

• Back-box Mounting – EXsmart uses a standard electrical back-box to ensure a neatly fitted installation.
• Interchangeable Covers – Clip-on covers supplied in either graphite or grey, allowing you to adapt the look of the reader to suit the surroundings.
• Two Reader Mode – Reduce cost and installation time by using MICROgarde to control 2 doors both with read-in/read-out.
• Pluggable Terminal Block Cable Termination – This allows the cable to be pre-wired before installation of the reader for convenience.
• Fully Encapsulated Design – Suitable for mounting both indoor and out, the design provides maximum protection against water ingress.
• Integral LEDs and Sounder – Gives the user unambiguous audible and visual indication of card reads and access status, maximising user confidence.
• Industry Standard Outputs – Allows connection to all standard access control panels.
• Read Range – EXsmart has a read range of up to 50 mm.