MICROgarde® II IP with PSU
Delivering cost-effective networkable performance, MICROgarde® II PSU is a two-door access control unit; the system provides reliable access control for up to 400 doors. Supplied with its own power supply unit for added security, MICROgarde® II delivers a highly effective solution with central control and event reporting and may be used either independently or as part of a network.
- True 2 door, read-In reader-Out controller
- Independent power supply to ensure continuity of protection
- Easy system expansion and retrofitting to other readers
- Nominated doors can be automatically released in the event of a fire
- Variable lock times ensure full compliance with the DDA
- Easy upgrade path for enhanced functionality and further system integration
- MICROgarde II supports 2 doors 4 readers
- May be used with TDSi or other third party readers for new or retrofit applications
- Easy to install, commission and operate - 2-wire RS-485 communication, and diagnostic LEDs
- System integration enabled through optional I/O and TCP/IP modules
- Fully flexible and scalable solution
- Custom reporting and automated back up
- A range of features including variable lock times, local anti-passback and automatic fire door release
|
Dimensions |
346 x 280 x 85 mm |
|
Weight |
4.9 kg |
|
Operating environment |
-5°C to +50°C, 0 to 95%RH (non-condensing) |
|
Power supply |
100 to 240 VAC, 1.2A. (with PSU) |
|
Cards |
10,000 when used with EXgarde PRO PC software |
|
Readers |
Maximum of 4 readers using TDSi eXprox®, Optica® and Digital Microcard readers in a read-in/read-out configuration or a maximum of 2 readers using the majority of other readers, keypad and biometric technologies including TDSi Microcard and those with standard clock & data, Wiegand and HID standard 37-bit (H10302) output formats |
|
Doors |
0,1 or 2 |
|
Inputs |
4 in total; 2 used per installed door |
|
Outputs |
2 (30V, 2A rating) in total; 1 used per installed door |
|
Expansion options |
Changeover relay module adds 2 additional relay outputs and 4 additional inputs |
|
Communications |
RS-232 with a built-in converter to RS-485 for downstream units, optional TCP/IP module (10/100Mbps Ethernet port) |
|
PC Specification |
Pentium P4, 1GHz, 256 MB RAM |
Product Overview
Firmware Updates
To access firmware updates and release bullitins please log in.
If you are not a registered user please create an account by clicking on the Create Account button on the Login tab or contact TDSi support team on 01202 723 535
Share This Site On LinkedIn