MICROgarde® I IP with PSU
MICROgarde® I PSU is a cost-effective, entry-level networkable access controller that delivers many of the benefits of much larger systems. The MICROgarde® system controls up to 200 doors, this MICROgarde® I unit is supplied with its own power supply unit. Each controller is capable of running independently or as part of a network.
- Independent power supply ensures continuity of protection
- System flexibility allows easy expansion as well as the ability to retrofit to existing equipment
- Nominated doors can be automatically released in the event of a fire
- Variable lock times ensure full compliance with the DDA
- Easy upgrade path for enhanced functionality and further system integration
- Supplied with integral power supply
- May be used with TDSi or other third party readers for new or retrofit applications
- Easy to install, commission and operate - 2-wire RS-485 communication, and diagnostic LEDs
- System integration enabled through optional I/O and TCP/IP modules
- Fully flexible and scalable solution
- Custom reporting and automated back up
- A range of features including variable lock times, local anti-pass back and automatic fire door release
|
Dimensions |
210 x 135 x 47 mm (without PSU) |
|
346 x 280 x 85 mm (with PSU) |
|
|
Weight |
600g (without PSU) |
|
Operating environment |
-5°C to +50°C, 0 to 95%RH (non-condensing) |
|
Power supply |
Input: 10 to 14VDC, 1A (without PSU) |
|
Cards |
10,000 when used with EXgarde PRO PC software |
|
Readers |
Maximum of 2 readers using TDSi eXprox®, Optica® and Digital Microcard readers in a read-in/read-out configuration, or 1 reader equipped with industry standard clock & data, Wiegand or HID standard 37-bit (H10302) output formats |
|
Doors |
0 or 1 |
|
Inputs |
4 in total; 2 used per installed door |
|
Outputs |
2 (30V, 2A rating) in total; 1 used per installed door |
|
Expansion options |
Changeover relay module adds 2 additional relay outputs and 4 additional inputs |
|
Communications |
RS-232 with a built-in converter to RS-485 for downstream units, optional TCP/IP module (10/100Mbps Ethernet port) |
Product Overview
Firmware Updates
To access firmware updates and release bullitins please log in.
If you are not a registered user please create an account by clicking on the Create Account button on the Login tab or contact TDSi support team on 01202 723 535
Share This Site On LinkedIn